EFFECT NUMBER OF WIRE TO DC GENERATOR PROTOTYPE WITH VARIATION DIAMETER WIRE
DOI:
https://doi.org/10.31002/nse.v1i1.181Keywords:
dc generator, magnet, coilAbstract
The modern era as now the needs of electricity is enormous. This makes the supply of non-renewable resources dwindling (coal and natural gas). This makes the emergence of smart ideas and innovations by using alternative energy. By using alternative energy we can save the use of non-renewable resources and can create energy efficient environmentally friendly.
This study aims to analyze the output power in DC motors by using variations in the number and diameters of the outer coils in order to produce maximum output power value. The research method used is the design and manufacture of tools and experiments by conducting a descriptive research approach.
The results of the test using different diameter variations of wire are 0.15 mm, 0.20 mm and 0.25 mm. The voltage test obtained voltage of 0.40 V for wire diameter 0.15 mm, 0.46 V for wire diameter 0.20 mm, and 0.52 V for 0.25 mm wire diameter. Simultaneous current and voltage gain can further improve the efficiency.
References
(1) Alfred, H., 1929, The Original Hubbard Coil Design, Geoff Egels All Natural Energy Web site.
(2) Alonso, M., 1994, Dasar-dasar Fisika Universitas, Edisi Kedua, Jilid 2, Penerbit Erlangga, Jakarta.
(3) Dharmawan, R, 2014, Perbandingan Unjuk Kerja Generator Sinkron Magnet Permanen Fluks Aksial Dengan Variasi Jumlah Lilitan Stator, Skripsi, Universitas Gadjah Mada.
(4) Grabel, A., 1981, Dasar dasar Elektroteknik, Edisi Kelima, Jilid 2, Penerbit Erlangga, Jakarta.
(5) Hiliday, D., 1996, Fisika, Jilid 2, Penerbit Erlangga, Jakarta
(6) Ishaq, M., 2007, Fisika Dasar, Edisi 2, Penerbit Graha Ilmu, Jakarta.
(7) Panglipuradhi, B, 2016, Proses Perbaikan Lilitan Ulang Pada Stator Motor Induksi Tiga Fasa 110 KW 330V, Tugas Akhir, Universitas Gadjah Mada.
(8) Prianto, E, 2013, Mesin Pembuat Lilitan Motor Listrik Berbasis Mikrokontroler Pada Industri Perawatan Dan Perbaikan Motor Listrik, Tesis, Universitas Gadjah Mada
(9) Serway, Jawett, 2012, Physic for Science and Engineering.
(10) Soedjojo, P., 1999, Fisika Dasar, Penerbit ANDI, Yogyakarta
(11) Soemanto, 1995, Pengenalan Motor Listrik
(12) Subodro, R., 2015, Pengaruh Ukuran Poli Dan Penambahan Jumlah Lilitan Spooel Pada Alternator Konvensional Terhadap Voltage Yang Dihasilkan, Jurnal AUTINDO, Politeknik Indonusa Surakarta Halaman 16-24, No.2, Vol.1, ISSN: 2442-7918
(13) Suyamto, 2008, Fisika Bahan Listrik, Cetakan 1, Penerbit Pustaka Pelajar, Yogyakarta.
Downloads
Published
Issue
Section
License
The authors who submit the manuscript hold almost all copyrights. However, the right of publication is transferred to Indonesian Journal of Natural Science Education. The right includes the rights to publish their article for the first time and to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature. This is copyright transfer form (Download) that must be signed by the corresponding author. After Journal of Natural Science and Integration published the article, the authors have the right to deposit it or republish it.
All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:
Indonesian Journal of Natural Science Education is licensed under a Creative Commons Attribution 4.0 International License.
you are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
